This is our best seller. It comes with auto-reverse and lots of safety functions.
Type:
Combination (Shredder & Extrusion)
Version:
3.3
Status:
Mature
License
CERN Open Source Hardware License
Authors
Weight
110 kg
Blade width
6 mm
Voltage
220V | 380V
AMP
7.8A
Nominal Torque
240 Nm
Output Speed
±70 r/min
Dimensions
Parts
| Part Nr. | Description | Configuration |
|---|---|---|
| 1 | Controller Hal9000 | Advanced | Auto-Reverse | Auto-Stop |
| 2 | Shredder Hopper | 2mm Stainless | 40 cm high |
| 3 | Extrusion | Basic (v3.2) |
| 4 | Motor | 2.2KW | 1480 RPM | 220V or 380 V |
| 5 | Reducer | MRV90 1:30 |
| 6 | Couplings | Custom Jaw Spider & Rubber filling |
| 7 | Legs | 40 x 40 mm | 20 cm long |
| 8 | Shredder | Upgraded v3 Shredder | 32mm hexbar | 30mm shaft - keyed |
| 9 | Extrusion Hopper | 2mm Stainless | Window | Quick-Release | Cooling-Ribs |
Features
- Safe hopper – with optional door.
- Precise auto-reverse when jamming.
- Status lights : Ok & Error
- Emergency and reset button
- Various motor protections (thermal & magnetic).
- Jam detection for extrusion mode
- Record and replay extrusion times
- Rigid, flexible and modular framework – enabling hacking and extensions. The base plate is 15 mm thick.
- The legs have M10 threads on each end so you can connect levelers or wheels. The legs have also extra holes to install easily extra sheets all around.
- Extrusion hopper can be easily detached.
- Thermocouples (sensors) have clips, easy to detach.
- Stops automatically after one hour of inactivity.
- Quality cables and wiring according to industrial standards.
- Precision mounts for shredder & extrusion, making sure everything is aligned perfectly.
- Strong 32 mm hexbar and 35 mm driveshaft
- Compression screw
- Industrial controller
